BAND NEW! Zacns 4-axle tank rail cars for Sale

The 4-axle rail car tanker, type Zacns, with a total capacity of 85 m3 is designed for the transport of light petroleum, products, class 3 RID (petrol, diesel, mineral oil) and other products that correspond to the tank code L4BH.
The wagon is a completely new one and corresponds to RID 2017 and STI 321. The wagon is suitable for international traffic.
Technical Discription

The tank is designed and built according to EN 14025, EN 12561, EN 12972 and RID 2017.
• Lenght over buffers 14940 mm
• Underframe (chassis) len 13700 +1210 mm
• Wheelbase of the wagon 9400 mm
• Distance between extreme axles 11200 mm
• Tank capacity 85 m3
• Useful capacity according RID aprox. 85 m3
• Outside tank diameter 2950 mm
• the length of the tank over the thorispheric bottoms 13000 +301-20 mm
• inclination of the tank towards the middle of the wagon 1°
• test pressure (calculation) (acc. RID, la 20°C) 4 bar
• work maximum pressure 3 bar
• hidraulik test pressure 4 bar
• external pressure ,(vakuum) 0,4 bar
• explosion pressure (acc. TRT 006 si RID 2017) 8,7 bar
• calculation pressure acc. RID + 20°C
• heigh to the buffers axis,(empty wagon) 1060 +51-10 mm
• heigh to the autmatic couplers axis (empty wagon) 1040 +5/-10 mm
• running speed:
– load wagon 100 km/h
– empty wagon 120 km/h
• minimal curve radius :
– on the mainline 150 m
– on the workshop Iine,single wagon 35 m
• fery-boat
-straight mainline 3° 30
– curve Radius 150m,mainline 2° 30 ‚
• maneuverability on the hump Yes,acc. EN 12663-2 / 2010
• kinematik gauge G1, conform EN 15273-2
• bogie with elastic side bearer , type Y25 Ls-C with H-type frame
• bogie wheelbase 1800 mm
• wagon gauge 1435 mm
• diameter of the monoblock wheels 920 mm
• wagon regim (brake) “ S “
• autoamtic brake type KE-GP-K
• brake shoes type/configuration 1 Bgu-K-Cosid 810
• brake cylinder type 12″
• handbrake with screw with actuating crank on the gangway platform
• buffers type cat. A, stroke 105 mm, EN 15551/2009 + Al / 2011
• screw couplers 850 KN, EN 15566 + Al / 2011
• draw hook 1000 KN, EN 15566 + Al / 2011
• draw gear 1000 KN EN 15566 + Al / 2011
• wheelsets 22.5 t / axles

Location Eastern Europe / RTC workshop